Revistas

Evaluation of Additive Manufacturing Techniques Applied to Ku-Band Multilayer Corporate Waveguide Antennas.

Escrito por Pablo Sanchez Olivares

Eduardo García Marín; José Luis Masa Campos; Pablo Sánchez Olivares; Jorge Alfonso Ruiz Cruz. Evaluation of Additive Manufacturing Techniques Applied to Ku-Band Multilayer Corporate Waveguide Antennas. IEEE Antennas and Wireless Propagation Letters. 17 - 11, pp. 2114 - 2118. (Estados Unidos de América): IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC, 11/2018. (DOI: 10.1109/LAWP.2018.2866631), (ISSN 1536-1225)

An Embedded Printed Antenna with Omnidirectional Azimuth Coverage for Automotive Applications

Escrito por José Manuel Fernández

J.M. Fernández González, P. Padilla, J.F. Valenzuela-Valdés, J.L. Padilla and M. Sierra Castañer, IEEE Antennas and Propagation Magazine, vol. 60, issue: 3, pp. 118-128, 2018 (DOI: 10.1109/MAP.2018.2818014) (ISSN: 1045-9243)

Low Cost Millimeter-Wave Antenna with Simultaneous Sum and Difference Patterns for 5G Point-to-Point Communications

Escrito por José Manuel Fernández

A. Tamayo-Domínguez, J.M. Fernández González and M. Sierra-Castañer, IEEE Communications Magazine, vol. 56, issue: 7, pp. 28-34, 2018 (DOI: 10.1109/MCOM.2018.1700989) (ISSN: 0163-6804)

An Embedded Lightweight Folded Printed Quadrifilar Helix Antenna: UAV Telemetry and Remote Control Systems

Escrito por José Manuel Fernández

J.M. Fernández González, P. Padilla, J.F. Valenzuela-Valdés, J.L. Padilla and M. Sierra-Pérez, IEEE Antennas and Propagation Magazines, vol. 59, issue 3, pp. 69-76, 2017 (DOI: 10.1109/MAP.2017.2686702) (ISSN: 1045-9243)

Groove Gap Waveguide in 3D-Printed Technology for Low Loss, Weight and Cost Distribution Networks

Escrito por José Manuel Fernández

A. Tamayo-Domínguez, J.M. Fernández Gonzálezand M. Sierra-Pérez, IEEE Transactions on Microwave Theory and Techniques, vol. 65, issue 11, pp. 4138-4147, 2017 (DOI: 10.1109/TMTT.2017.2709305) (ISSN: 0018-9480)

Revistas

Log in